Tips From the Moving Business Pros: The Best Ways To Move a Pinball Machine



With pinball making a big renewal across the nation, Mild Giant wants to ensure that these timeless, gorgeous devices remain damage-free while being transported. Oh, and we desire the individuals moving them to be safe, too.

At first glimpse, pinball makers can appear intimidating to move since of their fragility, size, and weight. Thankfully, our competent Giants have a couple of tricks up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

Most of modern-day pinballs (made in the last 20 years or two) have a hinge system which permits the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either two or 4 bolts. All Electro-Mechanical pinballs utilize this system, along with the early Strong State makers.

Later machines have hinges and utilize a locking system to keep the headbox upright. There may also be two bolts inside as included security, in case the latch is broken or unintentionally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball makers, you have to remove the headbox rear access panel to access to the bolts and plugs within. Usually this panel has a lock on it to keep it in place, however with time the key may have been lost. Frequently, there is a screw keeping this panel in location.

Once inside, eliminate the bolts and disconnect the large connectors that have electrical wiring decreasing into the machine. You may desire to identify these adapters to put them back in the right spot, however they must be various sizes, making it difficult to plug back incorrectly.

You can now eliminate the headbox entirely, or fold the headbox down onto the playfield glass. Make certain you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in location.
Early Strong State Pinballs

For early Solid State Pinballs, you will need to eliminate the back glass. There is a lock located on the headbox in one of 3 areas: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the.

Once unlocked, eliminate the back glass by raising it up utilizing the lift channel (at the bottom of the glass), then pull it out from the bottom.

Then, open up the back box lamp panel by lifting the lock situated on either the left-hand side or right-hand side. The panel can now swing out towards you, and provide you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise up the light panel in order to swing it open.

Now that you are inside, you can remove the bolts, and any plugs that have wires going down into the device. You might wish to identify these plugs to put them back in the right spot. You may not need to eliminate the plugs, as the circuitry needs to be long enough to permit the headbox to be folded down.

At this point, you can lock up the lamp panel and replace the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the provided key, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the device. This is an easy setup and needs no tools.

You're done if you can now fold down the head box onto the cabinet. Make certain you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.

You require to get within if you can not fold the head box down. There is a lock located at the top of the back glass in the. Use the supplied key to unlock, and eliminate the back glass by raising it up from the bottom, and after that pulling it out from the bottom.

Next, you will have to get rid of the display screen panel. You can do this by raising it up and out. Open the lamp panel. There will be a latch located on either the right-hand or left-hand side. (Some newer Williams and Bally pinballs do not have a different amp panel, it belongs to the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Remove the two bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Eliminating the Legs.

Pinball Device legs are held in location by 8 bolts. They will be either 5/8 inch or 9/16 inch heads. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be eliminated, and the legs will come off.

However these threaded plates Source and captive nuts can be harmed, and the usage of additional nuts might have been needed. If this holds true, you will require to open the front door of the pinball, slide out the playfield glass, and raise the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and get rid of the lock down bar. Move out the playfield glass, and put in a safe location. Next, raise up the playfield by putting your hand where the ball drains pipes, and raise the playfield up.

You must now have access to any nuts that might have been utilized. When any nuts have been eliminated, replace the playfield glass and lock down bar, and lock the front door.

Make sure to mark or remember which legs are for the front and back, as they his comment is here will be adjusted differently to suit.
Loading the Pinball.

You are now ready to transport your pinball machine. Before you load it, make sure you remove the pinballs so they don't bounce around during transport.

If you are moving the pinball using a van or SUV, it might this contact form be much easier to get rid of the legs simply prior to filling the maker. Get a pal to have and assist one of you supporting the pinball, while the other eliminates the front legs. Slide the device in, and after that remove the back legs. It is much easier to load the machine front.

Make sure you strap the pinball in, as you do not want it moving if you have to stop suddenly!

For Electro-Mechanical pinball machines, you require to get rid of the headbox rear gain access to panel to get access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball using a van or SUV, it may be much easier to get rid of the legs simply prior to filling the device. Get a buddy to help and have one of you supporting the pinball, while the other gets rid of the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *